NFPA Duplex RVL Vertical Tank Mount

NFPA Lubricated Rotary Vane

Available for vacuums ranging between 1.5 – 10.1 HP, the vertical tank mount configuration minimizes installation costs and maximizes availability of floor space. The duplex vertical tank mount configuration consists of two vacuum systems mounted on top of the receiver tank.

Control Panel

Control Panel

  • UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Manual reset for all alarms
  • All control and alarm functions shall remain energized while any pump in the system remains electrically online
  • Ethernet connectivity with embedded webpage for remote monitoring, password protected for remote adjustment of all operating parameters
  • Lag pump will start automatically should the lead pump fail to operate

Vacuum Pump

Vacuum Pump

  • Vacuum pump shall be an Oil-Sealed Rotary Vane type with air cooled design
  • Dynamically balanced multi-vane design
  • Bearings are permanently lubricated and sealed
  • Pump shall be direct driven
  • Equipped with a built-in anti-suck back valve mounted at the pump inlet
  • Means of removal of the vacuum pump for service or replacement without interruption to the system

Air Receiver

Air Receiver

  • ASME certified with provisions for isolating the receiver without interruption of the vacuum service
  • Rated for full vacuum service with a minimum 200 psig design pressure
  • Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing

General Features

  • Oil-Sealed Rotary Vane vacuum pump with air cooled design
  • UL listed control panel in a NEMA 12 enclosure with a 5.7" Touch Screen Display
  • Ethernet connectivity with embedded web-page for remote monitoring, password protected for remote adjustment of all operating parameters
  • Inside of the receiver consists of a two-part epoxy coating providing rust protection equal or better than that achieved by galvanizing

Vacuum System Accessories

  • Non-return valve
  • Back pressure gauge
  • High discharge temperature sensor (with visual indicator)
  • Oil drain valve
  • Oil sight glass
  • Flexible connector
  • Isolation valve
  • Check valve

Design Options

  • Please click the pink "manuals" icon above to download our NFPA design guide for air compressors.
  • Please click the purple "ordering guide" icon above to download our sizing guide for Source equipment.